Timor-Leste Stainless steel wire 202

Stainless steel wire production process is through the pulling force of stainless steel coil from the die hole of the wire drawing die to produce small cross-section of steel wire or non-ferrous wire, this method of production of steel wire size is accurate, surface finish, and the equipment and molds used are simple and easy to manufacture.

Category:

Timor-LesteStainless steel wire series

Inquire

Product Description

Specifications of Stainless Steel Wire

Chemical Composition	Stainless steel wire 304	Stainless steel wire 410	Stainless steel wire 430	Stainless steel wire 201	Stainless steel wire 202
C%	≤0.15	0.15	≤0.12	≤0.15	≤0.15
Si%	≤ 1.00	1.00	≤0.75	≤0.75	≤1.0
Mn%	≤2.00	1.00	≤1.00	5.5～7.50	≤7.5~10.0
P%	≤0.045	0.04	≤0.040	≤0.060	≤0.060
S%	≤0.030	0.030	≤0.030	≤0.030	≤0.03
Ni%	8-11	——	≤0.60%	1.0~2.0	4~6
Cr%	18-20	11.5~13.5	16.00~18.00	16.0 ～ 18.0	17~19
Mo%	——	——	——	——	——
Cu%	——	——	——	——	——
Ti%	——	——	——	≤0.25	≤0.25

Dimension

Wire Diameter(mm)	Allowance(mm)	Maximum Deflection Difference(mm)
0.2~0.59	+ 0.01 / - 0.01	0.02
0.6~0.99	+ 0.01 / - 0.02	0.03
1.0~1.49	+ 0.02 / - 0.02	0.04
1.5~1.99	+ 0.02 / - 0.03	0.05
2.0~2.49	+ 0.03 / - 0.03	0.06
2.5~2.99	+ 0.03 / - 0.04	0.07
3.0~3.5	+ 0.03/ - 0.05	0.08
3.5~4.0	+ 0.04 / - 0.05	0.09
4.1~6.0	+ 0.05 / - 0.05	0.10